Answers are grounded in this paper and cite their sources.
A modified 9Cr-1Mo steel was cooled to a temperature between the Ms point and room temperature from the normalizing temperature and then directly heated to the tempering temperature. It was found that the time to rupture at 650 and 700°C of the steel heat-treated by the new heat treatment increased 2–3 times longer than that of the steel conventionally normalized and tempered. The microstructure of the improved steel was tempered martensite and the size of martensite blocks was larger than for the conventional heat treatment. The hardness of the improved steel was fully recovered after tempering. This strengthening is not caused by fresh martensite, but caused by the refining of M23C6 and V(C,N) particles in addition to the increase in the martesite block size, where M denotes metallic elements.
No takes yet. Share an insight, caveat, or question.
Tamura et al. (2011) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: