Key result
Stents without longitudinal connectors improve wall shear stress restoration by ~11% in computational models.
Computational fluid dynamics demonstrate that stent design, specifically larger interstrut spacing and absence of longitudinal connectors, improves wall shear stress restoration, potentially reducing restenosis risk.
Answers are grounded in this paper and cite their sources.
Stent connector omission may optimize hemodynamics in models; animal-level computational data leave open any clinical impact on restenosis.
BACKGROUND: Restenosis after stent implantation varies with stent design. Alterations in secondary flow patterns and wall shear stress (WSS) can modulate intimal hyperplasia via their effects on platelet and inflammatory cell transport toward the wall, as well as direct effects on the endothelium. METHOD OF APPROACH: Detailed flow characteristics were compared by estimating the WSS in the near-strut region of realistic stent designs using three-dimensional computational fluid dynamics (CFD), under pulsatile high and low flow conditions. The stent geometry employed was characterized by three geometric parameters (axial strut pitch, strut amplitude, and radius of curvature), and by the presence or lack of the longitudinal connector. RESULTS: Stagnation regions were localized around stent struts. The regions of low WSS are larger distal to the strut. Under low flow conditions, the percentage restoration of mean axial WSS between struts was lower than that for the high flow by 10-12%. The largest mean transverse shear stresses were 30-50% of the largest mean axial shear stresses. The percentage restoration in WSS in the models without the longitudinal connector was as much as 11% larger than with the connector The mean axial WSS restoration between the struts was larger for the stent model with larger interstrut spacing. CONCLUSION: The results indicate that stent design is crucial in determining the fluid mechanical environment in an artery. The sensitivity of flow characteristics to strut configuration could be partially responsible for the dependence of restenosis on stent design. From a fluid dynamics point of view, interstrut spacing should be larger in order to restore the disturbed flow; struts should be oriented to the flow direction in order to reduce the area of flow recirculation. Longitudinal connectors should be used only as necessary, and should be parallel to the axis. These results could guide future stent designs toward reducing restenosis.
No takes yet. Share an insight, caveat, or question.
He et al. (2005) studied Restenosis after stent implantation. Stent design patterns vs. Alternative stent configurations was evaluated on Wall shear stress (WSS) and flow characteristics. Computational fluid dynamics modeling showed that stent designs without longitudinal connectors had up to 11% larger restoration in wall shear stress compared to those with connectors.
Synapse has enriched 10 related papers. Consider them for comparative context: