Answers are grounded in this paper and cite their sources.
The influence of Nb–V microalloying on the microstructure and sulfide stress cracking (SSC) resistance of API-5CT-C110 casing steel was investigated. Three samples with different V contents (0.01 V, 0.04 V, and 0.06 V) were prepared. The microstructure was characterized using scanning electron microscopy, electron backscatter diffraction, transmission electron microscopy, and X-ray diffractometry. The double cantilever beam (DCB) and electrochemical hydrogen permeation tests were conducted to evaluate SSC resistance and hydrogen-trapping behavior. The 0.06 V steel exhibited the highest mean critical stress-intensity factor for SSC (K ISSC ) of 32.6 MPa·m 0.5 . Nb-rich MC-type nanoprecipitates were detected in the examined regions of the 0.06 V steel. The reversible hydrogen-trap densities of the 0.01 V, 0.04 V, and 0.06 V steels were 4.34 × 10 19 cm −3 , 2.43 × 10 19 cm −3 and 5.50 × 10 19 cm −3 , respectively. In contrast, the 0.04 V steel exhibited the highest irreversible hydrogen-trap density of 5.91 × 10 19 cm −3 . The 0.06 V steel also exhibited a reduced fraction of coarse martensite blocks, an increased fraction of Σ3 boundaries, and a higher fraction of low-Taylor-factor regions. These results indicate that its higher mean SSC resistance is associated with Nb-rich MC-type nanoprecipitates, a favorable partitioning of reversible and irreversible hydrogen traps, and modified martensitic crystallographic characteristics.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: