Answers are grounded in this paper and cite their sources.
Bioethanol production was enhanced through porous silica-alginate/chitosan encapsulation of Saccharomyces cerevisiae in the fermentation process. Glucose was used as a pore-forming agent (PFA) during the silica coating process, with the PFA concentration values of 0 (G-0), 0.75 (G-0.75), 1.5 (G-1.5), and 3 g (G-3). The diffusion coefficient for G-3 was approximately 2.32 cm³ /s, representing an increase of 3.2 times compared to the reference G-0. The bioethanol production significantly increased from G-0 (2.73 ± 0.14 g/L) to G-3 (4.50 ± 0.24 g/L), indicating a 1.7-fold improvement attributed to enhanced membrane diffusivity. Optimal conditions for bioethanol production were determined as 35 ℃ , pH 5, and 150 rpm using 30 capsules for 10 g/L glucose. Capsule reusability revealed that G-0 and G-0.75 endured nine cycles, while G-1.5 and G-3 exhibited signs of failure after seven cycles, revealing a delicate balance in enhanced porosity and capsule stability. This result holds promise for alleviating the mass transfer limitations associated with traditional silica-coated/chitosan capsules in bioethanol production.
No takes yet. Share an insight, caveat, or question.
Abdulmumin et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: