Answers are grounded in this paper and cite their sources.
Laboratory study reveals limited dimethyl ether conversion across commercial diesel oxidation catalysts below 379 °C, suggesting the need for tailored exhaust aftertreatment designs.
This paper examines the stationary dimethyl ether (DME) oxidation behavior of state-of-the-art diesel oxidation catalysts (DOCs) under both model conditions and scenarios that closely resemble real-world application. The study investigates the implications of new hydrocarbon (HC) mixtures present in the exhaust gas matrix of DME-fueled combustion engines, focusing on the potential application of series-production DOCs within exhaust aftertreatment systems. Utilizing a synthetic gas test bench (SGB), gas mixtures are designed to simulate realistic operating conditions, including one scenario with 100% DME fuel and another where DME is blended with Diesel fuel, leading to varying HC mixtures. Experimental findings reveal that 2 out of 5 DOCs convert <50% of the raw DME emissions reaching temperatures of 374 °C. Under these realistic conditions, also 0 out 5 DOCs convert <80% until reaching 379 °C. Notably, while DME partly inhibits NO oxidation at intermediate temperatures, it does not promote N 2 O formation as propene does. The experiments further reveal distinct temperature-dependent patterns of secondary emissions, including formaldehyde, formic acid, carbon monoxide, methanol, and methyl formate. These secondary emissions are strongly affected by the exhaust gas composition and are substantially reduced or shifted under conditions representative of DME-containing engine exhaust.
No takes yet. Share an insight, caveat, or question.
Padeken et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: