Answers are grounded in this paper and cite their sources.
Experimental study demonstrates enhanced gas yield and methane production during pine wood torrefaction using nano-Fe2O3, indicating improved catalytic biomass deoxygenation.
The effect of nano-Fe2O3 on the structural transformation, thermal behavior, product distribution, and gas-phase hydrocarbon composition of pine wood waste during torrefaction was investigated. Torrefaction experiments were performed in a fixed-bed tubular reactor at 300 °C for 5 min under a continuous nitrogen atmosphere at 4 atm. Experiments were conducted using pine wood waste without the iron oxide additive and after homogeneous mixing with nano-Fe2O3 at a loading of 7 wt.% relative to the initial biomass mass. The structural changes in the biomass and recovered solid products were investigated by Fourier-transform infrared spectroscopy (FT-IR), while the morphology and elemental composition of the iron oxide-containing material were examined by scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM–EDS). The thermal behavior of the biomass was evaluated by thermogravimetric and differential thermal analysis (TGA/DTG/DTA), and the detected gas-phase hydrocarbons were analyzed by gas chromatography. The results showed that torrefaction caused pronounced changes in the oxygen-containing and aliphatic functional groups of pine wood waste, with differences observed between the non-catalytic and nano-Fe2O3-assisted treatments. TGA/DTG/DTA analysis indicated that the principal thermal transformation of the biomass occurred within the 200–380 °C range, with the maximum overall mass-loss rate observed at 322.8 °C. The addition of nano-Fe2O3 was associated with a decrease in the recovered solid fraction from 72.17 ± 0.47 to 66.80 ± 0.98 wt.% and an increase in the gaseous fraction from 27.83 ± 0.47 to 33.20 ± 0.98 wt.%. The gas-phase chromatographic results, expressed as normalized chromatographic peak-area percentages (Norm. %), showed that the relative contribution of methane increased from 34.2% to 39.8%. The relative contributions of the C2, C3, C4, C5, and C6 fractions decreased from 15.7%, 14.5%, 14.9%, 11.9%, and 5.4% to 13.4%, 11.8%, 12.5%, 9.7%, and 4.8%, respectively, whereas the C6⁺ fraction increased from 3.4% to 8.0%. The results indicate that nano-Fe2O3 influenced the structural transformation and solid–gas product distribution of pine wood waste and modified the relative composition of the detected gas-phase hydrocarbon fractions under the applied torrefaction conditions. The principal novelty of this study lies in the combined evaluation of the structural, thermal, and gas-phase compositional changes associated with nano-Fe2O3 -assisted torrefaction of pine wood waste.
No takes yet. Share an insight, caveat, or question.
Hasankhanova et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: