This is the authors' abstract. We don't add key points for this paper.
In bridgeless power factor correction converters and inverters, GaN high-electron-mobility transistors (HEMTs) operate in both forward and reverse conduction modes, which may feature different dynamicon-resistance (RON) behaviors. Despite the extensive study of dynamicRONunder forward conduction, dynamicRONunder reverse conduction still demands comprehensive evaluation. In this letter, the dynamicRONof two commercial p-GaN gate HEMTs with different technologies under forward/reverse conduction and hard/soft switching is characterized using the custom-designed multigroup double pulse test system, which nearly eliminates the accumulated self-heating effect in the device. First, the test was conducted atoff-state bias voltage = 400 V,IDS= 70%IDS(max). For the Schottky-typep-GaN gate HEMTs, the dynamicRONin reverse conduction is found to be more than 3%–5% higher compared to the forward conduction. However, for the hybrid-drain-embedded gate injection transistor, operating in reverse conduction mode leads to a slighter dynamicRONdegradation effect, with a reduction of approximately 10% compared to the forward conduction. Next,IDSwas modulated to evaluate its impact on dynamicRON. For both devices, during reverse conduction it was observed that the dynamicRONinitially decreases and subsequently increases with theIDSincrease.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Xie et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: