Answers are grounded in this paper and cite their sources.
Using nanowire field emitters can be a way to overcome the high cost of field emission display using Spindt-type tip arrays. How to integrate nanowire emitters into the field emission display device structure without influencing the device structure is an important issue. In this study, a gated CuO nanowire field emitter arrays were fabricated by a microfabrication process. By using a thermal oxidation process, the CuO nanowire field emitter arrays are prepared from copper thin film pads defined in a planar-gate structure. Effective emission current modulation by the gate voltage is achieved. Using a green phosphor screen as anode, a brightness of 92 cd/m2 was obtained at an anode voltage of 4.5 kV and a gate voltage of 120 V when operating under direct current mode. A vacuum-packaged field emission display using CuO nanowire field emitter arrays was also fabricated and display of moving images was demonstrated. The reported technique could be a promising route to achieved large area field emission display with high resolution display at low cost.
No takes yet. Share an insight, caveat, or question.
Zhan et al. (2010) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: