Answers are grounded in this paper and cite their sources.
Jute fiber reinforced polyethylene (PE) matrix-coloured composites were fabricated by compression molding technique and then thermomechanical properties were evaluated. The fiber content in the composites was 30% by weight. The tensile strength (TS), elongation at break (Eb%), flexural strength (FS), and hardness of the control jute composites were found to be 14.78 MPa, 34.16%, 43.40 MPa, and 95 Shore A, respectively. On the other hand, coloured (green) jute composites showed 12.94 MPa, 24.39%, 25.64 MPa, and 94 Shore A, respectively. Results indicated a slight decrease in the mechanical properties of the coloured composites compared to the control sample. Interfacial properties of the composites were investigated by scanning electron microscopy and the thermal properties of the composites were evaluated by the thermos-mechanical analyzer. Finally, based on the investigated properties the results revealed that the coloured composites have good mechanical strength for application in the interior panel sectors with decorative purposes.
No takes yet. Share an insight, caveat, or question.
Ruhul A. Khan (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: