Answers are grounded in this paper and cite their sources.
Diglycidyl ether of bisphenol-A (DGEBA) was cured by poly(amide-amidic acid) (PAA) and a commonly used curing agent, 4,4’-diaminodiphenylsulfone (DDS), in different molar ratios. It was found that the flexural strength, tensile strength, tribological properties, and thermal stability strongly depended on the molar ratios of PAA and DDS in the mixed curing agents. The highest flexural strength was obtained when DGEBA was cured with PAA individually. The tensile strength increased with the increase of PAA content in the mixed curing agents. The DGEBA cured with PAA containing curing agents possessed lower friction coefficient than that cured with DDS individually. The wear rate greatly decreased with the PAA content increasing in the mixed curing agent. Tribological behaviors and wear mechanisms were discussed by observing the morphology of wear debris and worn surfaces of the tested samples using scanning electron microscopy (SEM).
No takes yet. Share an insight, caveat, or question.
Chen et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: