Answers are grounded in this paper and cite their sources.
Aim: To evaluate flexural strength (FS) and micro-hardness of poly(methylmethacrylate) (PMMA) denture base material modified with Zirconium oxide (ZrO2), titanium oxide (TiO2) and zinc oxide (ZnO) nanoparticles powder with different concentration (1.5, 3 and 5% ) Subjects and Methods: Test specimens of PMMA of dimensions (65 ×10 × 2.5 mm) were made from heat-cured acrylic resin served as control group Another nine group were made of PMMA containing 1.5, 3, and 5% (w/w) (ZrO2), (TiO2) and (ZnO) nanoparticles. Two types of mechanical tests were performed on the samples: flexural strength and hardness. Results: Statistical analysis results revealed that non-significant increase in flexural strength of heat cured reinforced with ZrO2 Nps and ZnO Nps for all concentrations. While adding 1.5% and 5% of TiO2 Nps showed significant increase in flexural strength but 3% showed significant decrease values. Results revealed that non-significant decrease in hardness of heat cured reinforced with ZrO2 Nps ,TiO2 Nps, and ZnO Nps for all concentrations except 3% of heat cured reinforced with TiO2 Nps which showed non-significant increase in hardness. Conclusions: It was discovered that adding of 1.5and 5% Tio2 Nps to the used denture base materials would improve the flexural strength of the denture base materials. Also, adding 1.5, 3 and 5 % ZrO2, Tio2, and ZnO Nps reduces the microhardness.
No takes yet. Share an insight, caveat, or question.
Aboshama et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: