Answers are grounded in this paper and cite their sources.
In the present study we prepared a hyper-cross-linked polymeric adsorbent (NDA-701) possessing a uniquely bimodal pore size distribution for 4-nitrophenol (4-NP) adsorption from water. A macroporous polymeric adsorbent Amberlite XAD-4 and a granular activated carbon GAC-1 were chosen for comparison. NDA-701 exhibited better mechanical strength and higher capacity of 4-NP than XAD-4, which possibly resulted from its hyper-cross-linking nature and micropore structure, respectively. 4-NP adsorption isotherm onto NDA-701 is well described by the Freundlich model, and its better kinetics performance than GAC-1 resulted from its macropore structure. After adsorption NDA-701 was amenable to an entire regeneration by using NaOH solution as regenerant, whereas only approximately 75% regeneration efficiency was observed for GAC-1. Results of continuous fixed-bed runs in pilot and industrial scale demonstrated that NDA-701 is capable of completely removing 4-NP from chemical effluent with no capacity loss, and 4-NP can be readily recovered by further treatment of the concentrated regenerant solution. It is attractive that the value of the recovered 4-NP from chemical wastewater will even engender a surplus after countervailing all the operation cost during field application.
No takes yet. Share an insight, caveat, or question.
Pan et al. (2007) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: