Answers are grounded in this paper and cite their sources.
This work aimed to demonstrate the potential for material recycling of wind turbine blades (WTB) by using post-consumer regrind as a filler in epoxy composites. Composites were fabricated based on epoxy resin with 5, 10, 15, and 20% WTB by weight. Their thermal properties were assessed using differential scanning calorimetry (DSC) and thermogravimetry (TGA). The thermomechanical properties of the composites were determined by dynamic mechanical analysis (DMA). Charpy impact strength, flexural strength, Shore D hardness, and density were also evaluated. The fracture morphology of the composites was assessed using a scanning electron microscope, and their chemical structure via Fourier transform infrared spectroscopy (FTIR). It has been demonstrated that regrind can be used successfully as a non-reactive filler in epoxy compositions. Composites with 20% wt. WTB addition demonstrated enhanced stiffness, hardness, and thermomechanical properties, including a high storage modulus in both torsion and bending modes. The obtained results provide significant information on the potential of waste material and its valorization as a filler in thermoset composites.
No takes yet. Share an insight, caveat, or question.
Matykiewicz et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: