This is the authors' abstract. We don't add key points for this paper.
Low-resistance V/Al/V/Ag contacts have recently been reported to Al0.27Ga0.73N/GaN heterostructures with a thin GaN cap. These contacts had smooth surfaces and good edge definition. In this study, the V/Al/V/Ag metallization was adapted to other compositions of n-AlxGa1−xN, and it was found to provide low specific contact resistances as well as smooth surfaces on both n-GaN and n-Al0.58Ga0.42N. Another advantage of these contacts is that limited changes in specific contact resistance and morphology were observed when changing the metal layer thicknesses and processing conditions of the V/Al/V/Ag metallization on these semiconductors. The V (20)/Al (95)/V (20)/Ag (120 nm) contact provided a specific contact resistance of (2.1±0.9)×10−6 Ω cm2 when annealed at 825 °C for 30 s on n-GaN and a V (20)/Al (95)/V (5)/Ag (120 nm) contact provided a value of (2.4±0.3)×10−4 Ω cm2 when annealed at 875 °C for 60 s on n-Al0.58Ga0.42N. In each case, transmission electron microscopy revealed that the reaction between the semiconductor and metallization was limited and the majority of the interface was contacted by a composite of primarily Ag-bearing grains. Measurements of the specific contact resistance as a function of temperature revealed that field emission is the dominant current transport mechanism in low resistance Ohmic contacts to n-GaN and n-Al0.58Ga0.42N.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Miller et al. (2008) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: