This is the authors' abstract. We don't add key points for this paper.
This article suggests a new waveguide design that utilizes a “walled” architecture. Instead of relying on conventional gap waveguide structures to create electronic bandgaps and prevent field leakage, the proposed design introduces a “walled” guiding mechanism. This technique preserves transmission while maintaining the multilayer approach and eliminates the need for nails or chemical bonds to attach the layers. Simulations were carried out in the W-band (75–110 GHz) and D-band (110–170 GHz) using several metals, and measurements were performed in the W-band using aluminum. The simulation results show that the reflection coefficient was less than −40 dB over the entire D-band. At the same time, the average insertion loss was around 0.0054 dB/mm and around 0.0065 dB/mm for silver and gold, respectively. Similarly, the reflection coefficient was less than −45 dB over the 75–110 GHz range, with an average insertion loss of 0.0018 dB/mm for silver and 0.003 dB/mm for gold, respectively. The aluminum model’s reflection coefficient was less than −35 dB, and the average insertion loss was 0.0035 dB/mm. The experimental results achieved a reflection coefficient of less than –30 dB and the average transmission coefficient was −0.2 dB, with an insertion loss of 0.002 dB/mm. The simple stacking ability of the weightless walled metal plates and easy fabrication makes the proposed transmission line a promising technology in mmWave and Terahertz applications.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Syed et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: