This is the authors' abstract. We don't add key points for this paper.
A series of modified indium tin oxide (ITO) materials, including sol–gel zinc-oxide-coated ITO (ITO/ZnO), ZnO nanoparticle-coated ITO (ITO/ZnO-NP), 1,4-bis(3-aminopropyl)piperazine (BAP)-modified ITO, and polyethylenimine ethoxylated (PEIE)-modified ITO, were used for electron-collection electrodes in inverted polymer solar cells (PSCs). The modified ITO electrodes were prepared in air at temperatures below 100 °C, using various ITO films on flexible poly(ethylene terephthalate) substrates (PET–ITO) with sheet resistances ranging from 12 to 60 Ω sq −1 . The PET–ITO (12 Ω sq −1 )/ZnO-NP PSC exhibited an improved power conversion efficiency (PCE) (2.93%), and this PCE was ∼90% of that observed for a cell using glass–ITO/ZnO-NP (sheet resistance = 10 Ω sq −1 ; PCE = 3.28%). Additionally, we fabricated a flexible inverted ZnO-NP PSC using an indene-C 60 bisadduct (ICBA) as the acceptor material in place of [6,6]-phenyl-C 61 -butyric acid methyl ester (PCBM) and obtained a PCE of 4.18%.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Kuwabara et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: