Answers are grounded in this paper and cite their sources.
This paper investigates the effects of foam core density and aluminum skin plates on the low speed impact behaviour of adhesively bonded sandwich T-joints having a PVC foam core and aluminum face-sheets. The dynamic response of adhesively bonded sandwich T-joints was analyzed by the explicit finite element method. Two different material models were implemented to the foam core material: a hyperelastic model and a crushable foam material with ductile damage whereas the aluminum face-sheets were modelled as an elasto-plastic material. The cohesive response of adhesive interfaces was included using three dimensional cohesive element based on cohesive zone model. Adhesively bonded sandwich T-joint specimens were manufactured and tested to validate the numerical model. A very good agreement between the experimental and FE results were achieved. The density of the foam core material of adhesively bonded sandwich T-joint played important role on the joint failure mechanism. The joint having a stiffer foam core experienced more damage in both stiffener panel and adhesive layers.
No takes yet. Share an insight, caveat, or question.
Çalışkan et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: