Answers are grounded in this paper and cite their sources.
Lower flow regime bedforms have a significant influence on the hydraulic characteristics of flow, and their effects can be observed as discontinuities in stage–discharge rating curves. Various methods have previously been proposed to accurately predict bedform resistance; these methods are generally presented in the form of experimental diagrams or empirical relationships. Owing to the large number of influencing parameters, the application of such methods is often associated with considerable complexity. In the present study, using the results of 292 experiments collected from four different sources, a simple and practical method is proposed to predict the effect of lower flow regime bedforms on the increase in flow depth. The obtained results show reasonable accuracy, such that in 90% of the estimations the computational error was less than 25%. According to the newly proposed approach, the formation of ripple or dune bedforms in a rectangular channel leads to an increase in flow depth of approximately 25%. Based on this ratio, relationships were also developed to predict the Manning roughness coefficient. The variation of the bedform-related Manning roughness coefficient ranges from 0.25 of the grain Manning roughness coefficient for deep flow in narrow channels to 0.45 for shallow flow in wide channels.
No takes yet. Share an insight, caveat, or question.
Hasanzadeh et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: