Answers are grounded in this paper and cite their sources.
In this work, comparative studies have been made to investigate the effectiveness of several compatibilizers for three kinds of virgin plastic mixtures, high-density polyethylene (HDPE)/polypropylene (PP), low-density polyethylene (LDPE)/PP and HDPE/polystyrene (PS) blends, in order to gain insight into the recycling of wastes from those frequently encountered mixed plastics. Three copolymers were tested as potential compatibilizers for those blends: ethylene—propylene—diene terpolymer (EPDM)-g-maleic anhydride (EPDM-g-MAH) for HDPE/PP and LDPE/PP blends, styrene—ethylene (butylene—styrene) (SEBS) and SEBS-g-MAH, for HDPE/PS blends. The properties and morphology of each ternary blend containing a coplymeric compatibilizer were measured with differential scanning calorimeter, X-ray diffractometer, tensile tester and scanning electron microscope. The concentration of the graft copolymer was varied from 0 to 20 phr, whereas the blend composition was fixed at 50/50 by weight %. It was found that EPDM-g-MAH showed good compatibilizing effect for LDPE/PP blends but not for HDPE/PP blends, in general. It was also found that SEBS showed much better compatibilizing effects for HDPE/PP blend than the SEBS-g-MAH blend.
No takes yet. Share an insight, caveat, or question.
Ha et al. (1996) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: