Answers are grounded in this paper and cite their sources.
Experimental study demonstrates microstructural alterations and increased surface area in vanadiferous titanomagnetite, suggesting improved mineral reactivity for metal extraction.
Mechanical activation (MA), an intensive milling process capable of inducing physicochemical changes in solid materials, was applied to a vanadiferous titanomagnetite (VTM) originating from the Lac Doré Complex, Chibougamau, QC, Canada. The objective of this study was to investigate the structural and microstructural evolution of VTM under intensive milling conditions and the associated changes in particle characteristics, with particular emphasis on X-ray diffraction (XRD) peak intensity and broadening, microstrain, phase composition, particle size, and specific surface area. Mechanical activation was investigated by varying three milling parameters: milling time (5 g powder, 10 Hz, variable milling time), ball-to-powder ratio (variable powder mass, 10 Hz, 15 min), and milling frequency (5 g powder, variable frequency, 15 min). The XRD results reveal significant changes in the diffraction pattern of chamosite, including variations in peak intensity and pronounced peak broadening under the more intensive milling conditions of 5 g powder, 15 Hz, and 15 min. In contrast, the diffraction peaks associated with ilmenite and magnetite became more pronounced, while the calculated microstrain increased. Scanning electron microscopy (SEM) showed substantial changes in particle morphology following mechanical activation. Brunauer–Emmett–Teller (BET) analysis further demonstrated an increase in specific surface area with increasing milling frequency, while laser diffraction measurements revealed systematic variations in particle-size distribution among the three experimental series. Overall, the results demonstrate that mechanical activation produces measurable modifications to the mineralogical, structural, microstructural, and particle characteristics of Lac Doré VTM. These findings provide a basis for further investigation of the relationship between milling-induced structural changes, VTM reactivity, and subsequent metal-extraction performance.
No takes yet. Share an insight, caveat, or question.
Atmani et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: