This is the authors' abstract. We don't add key points for this paper.
This study investigates the development of surface-modified titanium alloy implants through sol-gel synthesis to prevent bacterial infections while maintaining biocompatibility. The optimized 50:50 TiO₂:chitosan nanocomposite coating exhibited superior performance characteristics, with AFM analysis revealing controlled surface topography Ra = 78 ± 7 nm) and uniform particle distribution. Electrochemical measurements demonstrated enhanced corrosion resistance, with impedance modulus increasing from 3.2 × 10⁵ Ω·cm² for uncoated Ti6Al4V to 2.8 × 10⁶ Ω·cm² for the optimized coating at 0.01 Hz. The coating showed excellent mechanical stability with an adhesion strength of 15.4 MPa and critical load of 18.5 N. Live/dead bacterial staining and CLSM analysis revealed significant reduction in biofilm formation, with time-dependent studies showing rapid initial bacterial inhibition within 6 h (68.7 % for S. aureus , 64.5 % for E. coli ) and sustained antimicrobial activity over 72 h (95.2 % for S. aureus , 93.1 % for E. coli ). The coating maintained structural integrity and performance after 30-day immersion in simulated body fluid, demonstrating its potential for long-term implant protection.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Min et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: