This is the authors' abstract. We don't add key points for this paper.
The polymer dielectric is a promising material for intelligent and energy-saving applications in modern electronic and power systems. However, there are many crucial drawbacks in the applications at elevated temperatures, such as high dielectric loss and low energy density. Herein, a method to enhance the thermal stability of the polymer dielectrics is presented, whereby SrTiO 3 particles are introduced into poly(ether imide) (PEI) film to fabricate polymer-based dielectric composites. SrTiO 3 is preferred as the filler for its moderate dielectric constant and wide band gap, which simultaneously restrains the leakage current density of the composites. The results show that the composite dielectric loaded with 3 vol % SrTiO 3 particles achieves a discharge energy density of 11.30 J/cm 3 at 640 MV/m. Furthermore, it exhibits the highest energy density of 10.30 J/cm 3 at 150 °C and 530 MV/m, while the discharge energy density and efficiency remain 8.82 J/cm 3 and 80% under 500 MV/m at 150 °C, respectively. The composites exhibit excellent fatigue resistance, and the discharge energy density is maintained at 96.21% with an efficiency of 95.96% after 10 5 charge–discharge cycles at 150 °C. This work elaborates the feasibility of adding SrTiO 3 particles into PEI to enhance high-temperature capacitive properties and the great potential for extensive industrial production.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Yuan et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: