Answers are grounded in this paper and cite their sources.
Maskless patterning routes that enable rapid, flexible prototyping of ultra-wide-bandgap transistors are highly desirable for accelerating the development of beta-phase gallium oxide (β-Ga2O3) electronics. Here, we present the first demonstration of maskless femtosecond-laser micromachining (fs-LM) utilized as a lithography-free approach to fabricate recessed gates in β-Ga2O3 MOSFETs. Controlled gate-recess depths are realized directly within the epitaxial channel and incorporated into functional transistors. Cross-sectional HR-TEM and EDS depth profiling within the gate region confirm the structural integrity of the underlying layer stack and show conformal HfO2 gate dielectric deposition over the laser-processed surface. However, SEM and AFM analyses reveal void formation and surface roughness within the recesses, which contribute to an elevated drain-induced barrier lowering (DIBL ≈ 716 mV/V) compared to a conventionally fabricated ICP-RIE reference device (DIBL ≈ 369 mV/V). While further optimization of the laser and post-processing parameters is required to mitigate laser-induced defects and match the electrical performance of plasma-etched controls, these results demonstrate maskless fs-laser micromachining as a prospective route for rapid device prototyping and low-volume fabrication of recessed-gate β-Ga2O3 MOSFETs.
No takes yet. Share an insight, caveat, or question.
Jorudas et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: