Answers are grounded in this paper and cite their sources.
Hydrogen sulfide (H2S) is a highly toxic and corrosive gas commonly present in landfill emissions and industrial environments, posing serious risks to human health and the environment even at trace concentrations. Therefore, the development of a sensitive, reliable, and robust H2S sensor is of outmost importance today. In this work, hexagonal tungsten oxide (h-WO3) nanorods were synthesized via a simple and cost-effective hydrothermal method and investigated as a sensitive and selective sensing material for H2S detection. The structural, morphological, and compositional properties of the synthesized h-WO3 were systematically characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The results confirmed the formation of phase-pure, highly crystalline hexagonal WO3 with a one-dimensional nanorod morphology and a porous, interconnected network favorable for gas-sensing applications. Gas-sensing measurements revealed that the fabricated conductometric h-WO3 sensor exhibited a remarkable response toward H2S at an optimal operating temperature of 200 °C, achieving a high response value (Ra/Rg) of 51.6 at 4 ppm and detecting concentrations as low as 0.15 ppm. The sensor demonstrated fast response and recovery times, excellent repeatability, good long-term stability, and outstanding selectivity against common interfering gases such as NH3, CO2, CO, SO2, and NO2. The superior sensing performance is attributed to the high surface area, porous nanorod architecture, and enhanced surface reactivity of h-WO3.
No takes yet. Share an insight, caveat, or question.
Fraj et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: