Answers are grounded in this paper and cite their sources.
Piezoelectric knocking sensors with a dense microstructure were fabricated at 960°C for 2 hours using various CuO‐added (Na 0.5 K 0.5 )NbO 3 ( NKN )‐based piezoelectric ceramics. The practical sensitivity ( S P ) of the knocking sensor, which is the ability to detect the knocking of a car engine, was influenced by the g 33 × k p value of the piezoelectric ceramics, indicating that the g 33 × k p can be considered a figure of merit of the piezoelectric ceramics used in the knocking sensor. The knocking sensor synthesized using the CuO‐added 0.95(Na 0.5 K 0.5 )(Nb 0.95 Sb 0.05 )O 3 –0.05CaTiO 3 ( CNKNS – CT ) ceramic, which showed a g 33 of 25.7 Vm/N and k p of 0.46, exhibited a high S P of 119 mV /g at the resonance frequency. The S P of the commercial knocking sensor, which was synthesized using the Pb(Zr,Ti)O 3 ( PZT )‐based ceramic, was 112 mV /g at the resonance frequency. Hence, the knocking sensor fabricated using the CNKNS – CT piezoelectric ceramic can be used to replace the commercial PZT ‐based knocking sensor.
No takes yet. Share an insight, caveat, or question.
Kim et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: