Answers are grounded in this paper and cite their sources.
Plasma disruptions will impose high magnitude, short duration radiative loads on the plasma-facing first wall of a commercial-scale tokamak, constituting a transient thermal ageing mechanism that affects the performance and lifetime of underlying structural and heatsink materials. In this work, the Magnum-PSI linear plasma device and an ancillary Nd:YAG laser were used to expose 9 samples of the structural steel Eurofer 97 to 1, 100, and 1000 reactor-representative thermal transients of 0.5, 1 and 3 ms duration. The resultant microstructural evolution was characterised via scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), electron backscatter diffraction (EBSD), scanning transmission electron microscopy (STEM), and microhardness mapping. A duration-dependent evolution of grain diameters, precipitate populations, and hardness were observed. Notably, after 1000 transients of 3 ms, evidence of dynamic recrystallisation, followed by grain coarsening was observed, accompanied by the dissolution of MX and M 23 C 6 precipitates. For the 1000 transient set, hardness reductions of 13%, 6.3%, and 11.2% for the 0.5, 1, and 3 ms respectively suggest a reduction of Hall-Petch strengthening and precipitate hardening contributions. A damage depth of 110–120 µm is estimated from analysis of precipitate depletion. This is supported by carbon diffusion length calculations and hardness mapping.
No takes yet. Share an insight, caveat, or question.
Tipping et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: