Answers are grounded in this paper and cite their sources.
Wire-electric discharge machining (W-EDM) is an advanced technology used for machining hard-to-cut materials with high hardness. Therefore, it is critical to characterize and model the Wire-ED machining performance for new materials having remarkable mechanical properties with respect to the multiple control parameters involved in the process. In this light, the present study investigates the multi-parametric optimization of current, pulse-on time (Ton), and pulse-off time (Toff) on material removal rate (MRR), kerf width (KW), surface roughness (R a) for Wire-EDM of artificially aged Al6061/B4C composite using response surface method (RSM) and grey relational analysis (GRA). The results of the investigation revealed that, Toff has the most significant impact on the multi-parametric response, with a percentage-wise contribution of 38% from the analysis of variance. The optimization results established that a multi-parametric combination of current - 6 A, Ton - 42.5253 ms, and Toff - 10 ms achieved the optimum response of MRR - 1.7036 mg/min, KW - 0.1727 mm, and R a - 5.6525 mm. The results obtained herewith have practical relevance to Wire-EDM industry for manufacturing applications.
No takes yet. Share an insight, caveat, or question.
Bhat et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: