Answers are grounded in this paper and cite their sources.
The effect of heat treatment temperature on the microstructure and specific contact resistance of oxidized Ni(5 nm)/Au(5 nm) contacts to p-type GaN was investigated. The minimum specific contact resistance (ρc) obtained was 4 × 10—6 Ω cm2 after heat treating at 500 °C in air for 10 min. The cross-sectional microstructure of heat treated Ni/Au films on p-type GaN was examined with transmission electron microscope (TEM) in conjunction with compositional analyses. The high value of ρc for samples heat treated at lower temperatures (<400 °C) was attributed to the fact that Au islands and crystalline NiO detached from the p-type GaN. When the temperature increased to 500 °C, NiO films and Au islands epitaxially constructed on p-type GaN matrix. The crystalline NiO may play a crucial role in the formation of low-resistance ohmic contact to p-GaN. Increasing the temperature further to 600 °C, large voids adjacent to p-GaN were observed which resulted in the reduction of contacting area deteriorating the contact resistance.
No takes yet. Share an insight, caveat, or question.
Chen et al. (1999) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: