Answers are grounded in this paper and cite their sources.
A new process for the fabrication of double positioning boundary (DPB) free 3C-SiC was demonstrated by utilizing the threading screw dislocations of 6H-SiC, using the following two steps: (1) formation of a spiral structure with six bilayer steps on a seed 6H-SiC; and (2) nucleation of 3C-SiC on the seed. In the first step, the six-bilayer step structure was formed via spiral dissolution using a molten Fe–Si alloy. The formation of a spiral structure on both the 6H-SiC (0001) and (0001̅) faces could be explained by BCF theory. In the second step, we observed that the nucleation and growth of 3C-SiC occurred only on the 6H-SiC (0001) face, while step-flow growth of 6H-SiC was observed on the (0001̅) face. The different growth modes presumably arose from the smaller step energy at the 6H-SiC (0001)/alloy interface than that at 6H-SiC (0001̅)/alloy interface, which was predicted from the width of the steps fabricated by the spiral dissolution. The obtained 3C-SiC on the continuous spiral steps of the seed 6H-SiC substrate had the same stacking structure as the seed, even at the 6H-SiC/3C-SiC interface. Consequently, we successfully obtained a DPB-free region of 3C-SiC from the start of the growth.
No takes yet. Share an insight, caveat, or question.
Kawanishi et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: