Answers are grounded in this paper and cite their sources.
Through testing more than 300 specimens, this study investigates the incorporation of fossil fuel extraction byproducts (EP) and graphite tailings (GT) in concrete production with two primary objectives: reducing environmental pollution and lowering CO2 emissions. To enhance the stability of concrete containing EP and to further reduce CO2 emissions, GT was incorporated at mass fractions of 10%, 30%, and 50%. The results demonstrate that the addition of GT significantly improves the performance of concrete containing EP. Uniaxial compressive strength tests were conducted at curing ages of 3, 7, and 28 days. The findings indicate that the inclusion of oil drilling waste (ODW) leads to a reduction in concrete strength, approximately doubles the hydration time, and decreases the peak hydration temperature by up to 50%. However, the incorporation of GT mitigates the adverse effects of ODW by optimising aggregate gradation and modifying oil absorption, depending on the mixing method employed. The study further identifies that the maximum allowable mass fraction of EP and GT in the aggregate is approximately 30%. Additionally, replacing 15% of cement with GT identified as an optimal and protective proportion against the detrimental effects of ODW contributes to further reductions in carbon emissions associated with concrete production.
No takes yet. Share an insight, caveat, or question.
Fathi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: