Answers are grounded in this paper and cite their sources.
The printed circuit board (PCB) is an essential component present in almost all electrical and electronic devices. The dramatic rise in the use of these gadgets has resulted in the generation of considerable e-waste, which cannot be disposed of by conventional ways due to the presence of hazardous and poisonous materials. Hydrometallurgy for copper extraction from e-waste, has several environmental implications as well as bioleaching from e-waste is a multifaceted process. This work introduces an experimentally validated pyrometallurgical process for the selective recovery of copper from PCBs utilizing a combination of conventional and time-efficient methods: incineration, pyrolysis, leaching, and cementation. The degradation rate of PCB in the pyro-metallurgical process is significantly elevated, reaching 90 % within 90 min at temperatures over 500 ºC during both pyrolysis and cremation methods. In nitric acid medium, a copper recovery of 97.9 % was achieved, whereas in sulfuric acid media, the recovery was 50.78 %. Additionally, from 50 g of pyrolyzed PCB, 3.15 g of liquid fuel and 14.85 g of gaseous fuel were produced. Conversely, in nitric acid media, a Cu recovery of 87.1 % was achieved, whereas in sulphuric acid media, the recovery was 49.04 % from burnt PCB. Both combustion and pyrolysis combined with nitric acid leaching present an effective and environmentally beneficial approach for recycling electronic trash.
No takes yet. Share an insight, caveat, or question.
Sultana et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: