Answers are grounded in this paper and cite their sources.
Carbon fiber-reinforced epoxy composites offer high structural performance, but the integration of industrial waste-derived fillers requires systematic assessment of their multifunctional effects. This study evaluates 1–5 wt.% bauxite residue as a secondary filler in continuous CF/EP laminates to establish composition-dependent relationships among mechanical, thermal, and fracture behavior. Carbon fiber content and processing conditions were maintained constant to isolate the influence of filler concentration. Among the investigated formulations, the 4 wt.% composite (C4) exhibited the balanced mechanical and thermal performance, achieving tensile, flexural, impact strengths, and RHN values are191.45 MPa, 194.28 MPa, 43.91 kJ m−2, and 147 respectively. C4 sustained a fatigue stress of 107 MPa at 105 cycles under R = 0.1 and 5 Hz. Through-thickness thermal conductivity decreased from 3.59 to 1.96 W m−1 K−1, while the coefficient of linear thermal expansion decreased from 9.87 × 10−5 to 5.28 × 10−5°C−1 across the investigated compositions. C4 exhibited a heat deflection temperature of 184°C, thermal degradation onset at 315°C, and 39% residual mass at 800°C. SEM examination of C4 revealed fracture features associated with fiber–matrix interaction. The findings demonstrate composition-dependent effects of bauxite residue and support its potential valorization as a secondary functional filler in composites
No takes yet. Share an insight, caveat, or question.
Muniyappan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: