This is the authors' abstract. We don't add key points for this paper.
The influence of hybrid macro steel fiber and macro polypropylene (PP) fiber on the flexural behavior of reinforced concrete beams is investigated in the present article. A total of 30 kg/m 3 macro steel fiber and 4 kg/m 3 macro PP fiber are adopted for their significant synergistic effect on the flexural toughness of concrete. Twelve reinforced concrete (RC) beams with steel ratios of 0.45%, 0.64%, and 0.87% are tested. Digital image correlation (DIC) technique is performed to monitor the crack width of beams. The interaction between hybrid fibers and steel rebars on the crack localization is investigated. Furthermore, predictions on load‐bearing capacity of hybrid fiber reinforced concrete (HyFRC‐RC) beams are compared with experimental results. The results show that the load‐bearing capacity of RC beams is moderately improved by adding macro hybrid fibers. For the serviceability limit state (SLS), the maximum crack width of beams is reduced significantly by macro fibers. Crack localization occurs for HyFRC‐RC beams in 0.45% steel ratio after yielding of rebars. A prediction model for load‐bearing capacity for HyFRC‐RC beams in crack localization is proposed and compared with experimental results from this investigation and other literature sources. The results show that the proposed model can significantly reduce the error between predictions and experimental data for beams suffering from crack localization.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Li et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: