Answers are grounded in this paper and cite their sources.
This study investigates the aerodynamic impact of leading-edge surface contamination on a NACA 63(3)-418 horizontal-axis wind turbine blade section operating in a low-Reynolds-number regime. While conventional high-Reynolds-number aerodynamics characterises surface roughness as strictly detrimental, this research evaluates the regime-dependent potential of surface roughness to act as a beneficial flow-control mechanism. Utilising Particle Image Velocimetry (PIV) and Computational Fluid Dynamics (CFD), we quantified the effects of varying roughness severities (P80 and P40 grits), suction-side chordwise extents (2 %, 6 %, and 10 %), and contamination densities (3 % and 4 %). Results demonstrate an angle of attack (α) dependent dual aerodynamic response. In the pre-stall regime (α ≤ 4°), leading-edge roughness acts as a parasitic disturbance, forcing premature boundary layer transition and increasing the recirculation area by approximately 35 % compared to the clean baseline. Conversely, at the transitional angle of α = 8°, coarser P40 grit reduced the recirculation area by 94 % relative to the clean baseline recirculation area. This was achieved by inducing a micro-recirculation bubble that injected turbulent kinetic energy into the near wall region, forcing rapid flow reattachment. Under deep stall conditions (α = 12°), restricting the finer P80 grit to a 2 % suction-side extent at 3 % contamination density proved optimal. This configuration injected concentrated near-wall turbulent kinetic energy (TKE), delaying separation from x/c ≈ 0.16 to x/c > 0.9. These findings reveal that highly localised degradation functions effectively as a passive stall-delay mechanism. Critically, for condition-based maintenance of low-speed rotors, the chordwise extent of leading-edge contamination is a more aerodynamically significant parameter than its mere presence.
No takes yet. Share an insight, caveat, or question.
Chauhan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: