This is the authors' abstract. We don't add key points for this paper.
The increasing power density of SiC power modules presents significant challenges in achieving uniform high-heat-flux thermal management, which is often limited by conventional packages. To address this, an embedded microfluidic-cooled SiC power module is developed, combining embedded microchannels and nano-silver sintering to enable efficient and uniform cooling. Microchannels were directly fabricated beneath the die footprint in the direct-bonded copper (DBC) substrate using picosecond laser etching, with a crossover double-layer manifold integrated into the baseplate to facilitate large-area liquid distribution. The thermal performance and temperature uniformity of the proposed design were first validated using SiC thermal test chips (SiC TTCs). Our results demonstrated an ultra-low junction-to-fluid thermal resistance of 0.064 K/W and a coefficient of performance (COP) greater than 20,000, representing a 52% reduction and more than a 10-fold improvement over conventional heat sinks, respectively. The design allowed reliable heat dissipation up to 655 W at a coolant flow rate of 3 g/s, reducing junction temperature gradients by 86%. Finally, when applied to a practical SiC power module, the improved thermal performance of the new architecture led to an increase in current capacity by 43%. The proposed co-designed integrated microfluidic-cooled packaging architecture offers an efficient and easy-to-extend solution for next-generation high-power-density power electronics.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Tang et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: