This is the authors' abstract. We don't add key points for this paper.
The latent heat energy utilized phase-change material stores enormous amounts of energy in relatively small spaces. The poor thermal conductivity of the phase change material has a significant drawback. Several techniques have been developed to solve this drawback, a geometrical modification was applied to predict the impact on the charging rate and time of the phase change material. A numerical analysis is presented to optimize the angular orientation of the inner flat tube in a double tube latent heat storage system. ANSYS 17.2 was used to execute a two-dimensional unsteady numerical model. The numerical model was validated via experimental published work. Twenty numerical cases of inner flat-tube aspect ratios of 0.5, 0.6, 0.7, 0.8, and 0.9 with angular orientations of 0°, 30°, 60°, and 90° were analyzed. The findings showed that; as the aspect ratio decreases, the average charging rate improvement is increased. For aspect ratios of 0.9 and 0.5, the improvement in entire charging time for the greatest orientation (θ = 90°) relative to the horizontal flat-tube case (θ = 0°) was 11.19% and 49.46%, respectively. The inner tube with an aspect ratio of 0.5 and angular orientation of 90° had the highest average charging rate.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Alnakeeb et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: