Influence of Alloy Composition and Dealloying Solution on the Formation and Microstructure of Monolithic Nanoporous Silver through Chemical Dealloying of Al−Ag Alloys

This is the authors' abstract. We don't add key points for this paper.

We present a facile and effective route to fabricate monolithic nanoporous silver (NPS) ribbons through chemical dealloying of melt-spun Al−Ag alloys comprising α-Al(Ag) and Ag 2 Al under free corrosion conditions. The microstructure of the NPS ribbons was characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy dispersive X-ray analysis (EDX). The experimental results show that alloy composition and dealloying solution have a significant influence on the dealloying process and the formation of NPS. The Al−Ag alloys with 15−40 atom % Ag can be fully dealloyed in the 5 wt % HCl solution, but a minor amount of undealloyed Ag 2 Al can be detected in the as-dealloyed ribbons from the Al-45 and 50 Ag alloys. The existence of α-Al(Ag) can supply penetration paths for the solution and promote the dealloying of Ag 2 Al in the two-phase Al−Ag alloys. Moreover, the synergetic dealloying of α-Al(Ag) and Ag 2 Al in the two-phase Al−Ag alloys and fast surface diffusion of Ag result in the formation of NPS with a homogeneous porous structure. The Al−Ag alloys with 15−50 atom % Ag cannot be fully dealloyed in the 20 wt % NaOH solution, leading to the formation of NPS/Ag 2 Al composites. In addition, the Al-60 Ag alloy containing a single Ag 2 Al phase does not react with the 5 wt % HCl or 20 wt % NaOH solution even at high temperatures (90 ± 5 °C).