Answers are grounded in this paper and cite their sources.
Soft magnetic materials play a critical role in modern electronic and electromagnetic systems due to their high permeability, low coercivity, low hysteresis loss, and high saturation magnetization, which enable efficient operation at high frequencies. This review summarizes the development of integrated high-frequency soft magnetic materials over the past five decades and performs a comparative property-space analysis of 97 soft magnetic materials across nine families, mapping the tradeoffs among saturation flux density, resistivity, magnetostriction, permeability, Gilbert damping, and Curie temperature that govern material selection for integrated devices. The emphasis is placed on three representative systems: FeCoN thin films, FeGaB magnetostrictive alloys, and spin-spray ferrite thin films. FeCoN thin films provide an extremely high saturation flux density while preserving excellent soft magnetic behavior, mechanical hardness, and corrosion resistance. Incorporation of nitrogen into sputtered FeCo alloys enables saturation flux densities of approximately 2 4 k G with hard-axis coercivity below 1 O e , surpassing the 2 0 k G limit of conventional soft magnetic metals and enabling high-performance magnetic recording write heads and integrated magnetic components. FeGaB thin films overcome the traditional trade-off between magnetic softness and magnetostriction through boron-induced amorphization, exhibiting low coercivity, narrow ferromagnetic resonance linewidth, high saturation magnetostriction, and high piezomagnetic coefficient for strain-mediated magnetoelectric and magnetoacoustic devices such as voltage-tunable inductors/transformers/filters, magnetoelectric antennas, magnetoelectric sensors, and non-reciprocal magnetoacoustic isolators. Spin-spray MnZn- and NiZn-ferrite thin films provide a complementary approach through low-temperature aqueous deposition compatible with semiconductor and printed circuit boards, offering high permeability at MHz–GHz frequencies for integrated inductors and RF magnetic devices. The synthesis, magnetic properties, device demonstrations, and remaining challenges of these materials are discussed, together with perspectives for future integrated magnetic, magnetoelectric and magnetoacoustic technologies and five forward-looking research directions in which these three systems converge: three-dimensional integration for AI power delivery, on-chip broadband nonreciprocity for 5G and 6G front ends, cryogenic magnon-phonon coupling for hybrid quantum magnonics, room-temperature biomagnetic sensing, and strong room-temperature magnon-phonon coupling for magnetoelectric and magnetoacoustic device performance enhancement.
No takes yet. Share an insight, caveat, or question.
Luo et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: