Answers are grounded in this paper and cite their sources.
The fast-growing world population along with the problem of the lack of purified water, have made water cleaning technologies more important. The present investigation lokks into the water contamination issue through utilizing used cigarette filters, which are non-biodegradable, to purify methylene blue dye in water. This method uses acid and base treatments to create effective adsorbents. The study develops a sustainable and affordable way to remove dye by reusing cigarette butts and using a method to improve the process. Experiments were done in batches to see how factors like water acidity, dye amount, and how much adsorbent is used affect dye removal. A special method called Box-Behnken design, part of response surface methodology (RSM), was used to fine-tune the process. Software called Design-Expert helped analyze the results and understand how each factor and their interactions affect dye removal. Tests using FTIR and SEM showed that the surface of the cigarette butts was changed successfully. The study also looked at how the dye pH solution relates to the point of zero charge (pH ZPC ) of the treated cigarette butts. pH ZPC was found to be 2.38 for those treated with acid and 7.71 for those treated with base. Both kinds of treated cigarette butts removed over 99% of the dye, with the base-treated ones being more effective because of their special groups. The best results happened when the solution was slightly basic, not too much adsorbent was used, and the dye concentration was low. The study also found that the way the dye is removed follows the pseudo-second-order model closely. Overall, using cigarette butts as adsorbents shows great promise for cleaning water, offering a new and useful way to treat polluted water.
No takes yet. Share an insight, caveat, or question.
Hosseinipour et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: