Answers are grounded in this paper and cite their sources.
The permeability of biaxially oriented polyethylene terephthalate, PET, to vapors from 5%, 30%, and 100% formic acid solutions as well as the vapor from a 30% acetic acid solution was measured by gravimetric analysis in order to determine the transmission rate of the vapors through PET folders and enclosures made from Mylar™ and similar materials, and ultimately understand the microenvironment that is created inside an encapsulate. The data shows that the permeation of formic acid vapor is at least two orders of magnitude slower than the permeation of water vapor. Measurements of the permeation of 30% acetic acid vapor through PET seemed to be due to the permeation of the water only, and the permeation of the acetic acid, if it occurred, occurred too slowly to be measured. The size of the diffusing molecule determines the permeation. Since the permeability decreases as the size of the diffusing vapor molecule increases, a plot of permeability versus vapor size allows the permeability of various other vapors through PET to be predicted. Colorimetry showed that porous PET allowed ambient vapors to diffuse into the encapsulate, and the entire paper within the encapsulate was affected, not only the paper near the holes in the PET.
No takes yet. Share an insight, caveat, or question.
McGuiggan et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: