Answers are grounded in this paper and cite their sources.
The demand for weight reduction in elevating platforms has become increasingly critical due to legal transport constraints and operational efficiency requirements. Current structural and safety components, primarily fabricated from metallic materials, present limitations in terms of maneuverability, labor requirements, and energy consumption. This study addresses the design and development of composite and metal-composite hybrid components to achieve significant weight reductions, targeting 25% in structural members, without compromising mechanical integrity or safety standards. The prototype fabrication ultimately achieved a weight reduction of approximately 40% in the composite floor panel, the primary redesigned element, corresponding to an overall platform mass reduction of 26.1% across all redesigned components ( Table 3 ), exceeding the initial design target for these elements. A key objective is the implementation of a metal-composite hybridisation system capable of withstanding the structural loads encountered during platform operation. The research encompasses material selection, mechanical characterization, and structural optimization, with particular focus on the behavior and reliability of critical metal-composite joints under load. The study demonstrates the potential of advanced composites to replace conventional metal parts in elevating platforms, contributing to reduced assembly time, improved energy efficiency, and enhanced safety, thereby supporting a broader industrial shift toward lightweight engineering solutions.
No takes yet. Share an insight, caveat, or question.
Seoane-Rivero et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: