Answers are grounded in this paper and cite their sources.
N, N -Dimethylethanolamine (DMEA) is a promising absorbent due to the relative higher reaction rate and high capacity for CO 2 capture. In this work, the CO 2 absorption performance into aqueous DMEA solution using a polytetrafluoroethylene (PTFE) hollow-fiber membrane contactor (HFMC) was investigated experimentally and numerically. The CO 2 absorption fluxes were determined under various important operating parameters, including liquid velocity, gas velocity, liquid feed temperature, CO 2 partial pressure, and CO 2 loading in liquid phase. In addition, a 2D steady-state mathematical model was established to predict the CO 2 absorption flux in two operation modes, nonwetted and partially wetted modes, and was validated by using the CO 2 absorption into water and aqueous MEA solution. The experimental and simulated results revealed that the CO 2 absorption flux can be enhanced by increasing liquid velocity, liquid-phase temperature, and amine concentration in a moderate range. Also, the CO 2 absorption flux will increase with the increasing gas velocity and CO 2 partial pressure but decrease with increasing CO 2 loading in the liquid phase. In addition, the membrane wetting can cause a severe deterioration in the CO 2 absorption performance even with a slight membrane wetting. The CO 2 absorption fluxes for CO 2 absorption into DMEA solutions show the good agreement with or are closer to the simulated data with the membrane wetting of 10% under the same operational conditions, with the average absolute relative deviation (AARD) of 5.02%. Furthermore, the obtained radical and axial CO 2 concentration profiles from the mathematical model were also discussed to further understand the CO 2 absorption process.
No takes yet. Share an insight, caveat, or question.
Cao et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: