Answers are grounded in this paper and cite their sources.
The mechanism of recrystallization texture development is changed by the chemical composition of materials, cold-rolling reduction, and annealing conditions. This study discusses the development of recrystallization texture for severely cold-rolled pure iron. In cold-rolled iron with 99.8% reduction, the deformation texture was a strong α-fiber (RD//<011>) with high strain. During annealing in a temperature range from 20°C to 800°C, in this highly strained α-fiber, the microstructure started to recover from a low temperature. Thereafter, recrystallized grains began to appear at 350°C, and many recrystallized grains were generated at random locations. Their textural components were {100}, {211}, {111}, and {411}, which were already included in the α-fiber. At 550°C, recrystallization was completed, and the resulting recrystallization texture was similar to the original cold-rolling texture. This texture was developed by unique microstructural changes, which could be classified as continuous recrystallization. During grain growth stage, the recrystallization texture changed into the {100}<012> component presumably by the selective growth of recrystallized grains governed by the size effect.
No takes yet. Share an insight, caveat, or question.
Tomita et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: