Post-dynamic α to β phase transformation and reverse transformation of Ti-5Al-3V alloy after hot deformation in two phase region

This is the authors' abstract. We don't add key points for this paper.

The microstructural evolutions and resulted mechanical responses during isothermal holding of multipass hot deformation are essential aspects in the processing of high performance titanium alloys. In this work, isothermal holding testing was performed on a Ti-5Al-3V alloy after hot compression at temperatures of 900 °C, 930 °C and 960 °C, respectively. Stress relaxation, dilatometer measurements, and microstructure examinations (i.e. scanning electron microscope, electron backscatter diffraction and transmission electron microscope) were employed to investigate the phase transformation behaviors. The results showed a flow stress hardening phenomenon during the interrupted isothermal holding in two phase region. The post-dynamic transformation from α to β phase took place first during the early stage of isothermal holding after hot deformation. With longer isothermal holding time, the reverse transformation of meta-stable β phase to α phase was then observed. Under TEM, the reverse transformed α phases were isolated from quenched α' phases. The in-depth mechanisms of post-dynamic α to β phase transformation and reverse transformation were discussed as well.