Answers are grounded in this paper and cite their sources.
A determination of stacking fault energy (SFE) of the austenite phase of a duplex stainless steel, material no. 1.4462, has been carried out using transmission electron microscopy (TEM). Furthermore, cold rolling tests and microstructural analysis have been realized in order to allow a detailed discussion of the obtained SFE-values. The results of this Investigation indicate that the stacking fault energy of the austenite phase within the duplex stainless steel Is lower than those of single-phase austenitic stainless steels. This is justified by the chemical composition; mainly by the Cr and Ni alloying contents. Nevertheless, work hardening of the austenite during cold deformation is not as accentuated as expected by the low SFE-values, because at higher deformation levels the deformation mainly occurs within the ferrite phase.
No takes yet. Share an insight, caveat, or question.
Reick et al. (1996) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: