This is the authors' abstract. We don't add key points for this paper.
InSnZnO (ITZO) thin-film transistors with terbium (Tb)-doped active layers were fabricated to improve the bias-stress stability while maintaining high field-effect mobility. The Tb doping was achieved by Tb4O7 sputtering, with a sputtering power ranging from 0 W to 15 W. Its influence on oxygen vacancies, electrical performance, and bias-stress stability of ITZO TFTs was investigated. The Tb doping can modulate the defect-related oxygen components within ITZO films, thereby affecting the mobility and negative-bias stress/positive-bias stress (NBS/PBS) stability. Low-concentration doping has a minor effect on the oxygen components in ITZO, whereas Tb doping with high concentration may introduce additional defects or oxygen impurities, leading to large threshold-voltage shifts ( Δ V ₜₕ ) under NBS and PBS. At a Tb4O7 sputtering power of 10 W and an annealing temperature of 350~∘ C, the device exhibited Δ Vth values of −1.5 V under NBS and + 1.9 V under PBS. Annealing from 250 to 350~∘ C substantially improved electrical activation, while the NBS/PBS threshold-voltage shifts remained below 2 V and varied non-monotonically. These results demonstrate that precise control of the Tb4O7 co-sputtering and annealing conditions is essential for ITZO TFTs with balanced mobility and stability.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Sun et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: