This is the authors' abstract. We don't add key points for this paper.
C-H diamond metal-oxide-semiconductor field effect transistors with different structures were fabricated on the same polycrystalline diamond plate. Devices A and B with 25-nm-thick high temperature (300°C) atomic layer deposition grown Al2O3dielectric have the same source-to-drain distance of 6 μm and different gate length of 2 μm and 6 μm, respectively. Both devices show ultra-high on/off ratio of over 1010 and ultra-low gate leakage of below 10-10A and continuous measurement stability. Device B with the source/drain-channel interspaces eliminated has achieved an on resistance of 46.20 Ω·mm, which is record low in the reported 6-μm H-diamond MOSFETs with the gate dielectric prepared at high temperature (≥ 300 °C). Meanwhile, device B shows larger drain current in a large portion of the linear region at VGS = -6 V, and a just slightly smaller IDmax compared with device A though its LG is three times of that of device A. A simple model of ID was used to explain the physics behind this phenomenon. In addition, the breakdown voltage is 145 V for device A and 27 V for device B, corresponding to the average breakdown field of about 0.72 MV/cm and 10.8 MV/cm, respectively.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Ren et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: