Answers are grounded in this paper and cite their sources.
The evolution from transient conditions to dark-current steady state following the application of a step field to a-As2Se3 sandwich cells fitted with Bi, Ni, Ag, Au, Sn, C, Ga, Al, and Cu has been measured. J-vs-E characteristics are in almost all cases found to be similar to those already published on the Au : a-As2Se3 system. These J-vs-E characteristics show both an extensive region of linear field dependence and a superlinear region in which the current is not space-charge limited. Dark currents in a-As2Se3 and related chalcogenides have been described in terms of a single bulk-controlled mechanism operative at all fields, meaning that contact invisibility (Ohmicity) has been tacitly assumed. At fields exceeding 104 V/cm, the hole transit time in a-As2Se3 becomes the dielectric relaxation time and under these circumstances an Ohmic contact will, under step-field excitation, exhibit a well-characterized space-charge-limited transient response. None of these contacts exhibit this response; instead they behave as finite injectors supplying holes with a diminishing efficiency in the time after application of a voltage step and at a rate which is always much less than CV per transit time. The resulting small-signal transient response exhibits a local maximum at a time following excitation which is significantly affected by the contact-reservoir decay time. The steady-state dark-current density above 104 V/cm must therefore reflect an injection efficiency relatively insensitive to the choice of contact.
No takes yet. Share an insight, caveat, or question.
M. Abkowitz (1979) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: