Answers are grounded in this paper and cite their sources.
High-power laser optical components usually require low surface reflectance, excellent thermal stability, and reliable laser resistance. Here, large-area (2 × 2 cm2), double-sided fused silica nanopillar metasurfaces were fabricated by nanoimprint lithography for broadband and wide-angle antireflection. The gradient-index nanostructure reduces the average reflectance to below 2.4% across the visible-to-near-infrared range, with a minimum near 720 nm, consistent with interference-assisted impedance matching. The patterned fused silica maintains low reflectance over a wide angular range with weak polarization dependence. Enhanced wettability is also observed, with the water contact angle decreasing to approximately 40°. After annealing at 1100 °C for 30 min under N2, the morphology and reflectance of the monolithic nanostructure remained nearly unchanged, demonstrating robust high-temperature stability. Finally, an estimated laser-induced damage threshold of 23.5 J/cm2 is obtained for defect-free regions under 1064 nm nanosecond irradiation, exceeding reported values for comparable SiO2 micro/nanostructured antireflective surfaces. These results demonstrate a scalable route to broadband, wide-angle, and thermally robust fused silica optics for high-energy laser applications.
No takes yet. Share an insight, caveat, or question.
Luo et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: