This is the authors' abstract. We don't add key points for this paper.
Ultra-low-carbon, high-strength steels have gained significant attention due to their exceptional mechanical properties. To enhance the performance of the steel, understanding the precipitation behavior of strengthening precipitates is crucial. In this study, the precipitation behavior of ultra-low-carbon high-strength steel strengthened by nanoscale copper (Cu)-rich precipitates (CRPs) and carbonitride (CN) atomic clusters was characterized using atom-probe tomography after tempering at 400, 450, 600, and 650 °C for 2 h. The results revealed that the nanoscale copper CRPs and the CN atomic clusters were the main strengthening precipitates. The CRPs, enriched only in Cu, were observed at 400 °C. Segregation of nickel (Ni) and manganese (Mn) to the CRPs occurred at 450 °C, and the number densities of CRPs achieved the maximum value, leading to the highest strengthening effects. The size of the CRPs increased with increasing temperature; however, the size of the clusters of the carbide-forming atoms remained at almost ~1.6 nm. At 650 °C, the concentration of Cu, Ni, and Mn atoms in the CRPs was about 85.4, 4.5, and 4 at.%, respectively; however, that of Fe decreased significantly. In the lath boundaries, the size of 10% C and 0.4% C iso-surfaces was relatively larger than that in the matrix. In a reverted austenite region at 600 °C, the concentration of Ni in the reverted austenite, CRPs, and matrix was about 15, 2.5, and 2.5 at.%, respectively.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Liang et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: